Fire Safety and Abatement Evalations

Fire abatement is not just about clearing out weeds and dead wood. Fires can be started from many different things. We can help you learn what the common causes are and how to prevent them. We can also teach you how to “harden” your home and make it more fire resistant. By learning the techniques listed below you can greatly reduce the risk of fires on your property.

Equipment Use

Using Equipment Properly

If you live in a wildland area you need to use all equipment responsibly. Lawn mowers, weed-eaters, chain saws, grinders, welders, tractors, and trimmers can all spark a wildland fire. Do your part to keep your property and community fire safe.

Mowing 
Mow before 10 a.m., but never when it’s windy or excessively dry. Lawn mowers are designed to mow lawns, not weeds or dry grass. Metal blades striking rocks can create sparks and start fires. Use caution.

Spark Arresters
In wildland areas, spark arresters are required on all portable gasoline-powered equipment. This includes tractors, harvesters, chainsaws, weed-eaters and mowers.

  • Keep the exhaust system, spark arresters and mower in proper working order and free of carbon buildup.
  • Use the recommended grade of fuel and don’t top it off.

Equipment Use
In wildland areas, grinding and welding operations require a permit and 10 feet of clearance. Keep a shovel and a fire extinguisher ready to use.

  • Don’t drive your vehicle onto dry grass or brush. Hot exhaust pipes and mufflers can start fires that you won’t even see – until it’s too late!
  • If you have any questions don’t hesitate to call us at 530-264-6800.

Harden Your Home

Hardening Your Home

Flying embers can destroy homes up to a mile from a wildfire. “Harden” your home now before a fire starts by using ember-resistant building materials.

Here are some things you can do to harden your home and make it more fire resistant.

Roof
The roof is the most vulnerable part of your home. Homes with wood or shingle roofs are at high risk of being destroyed during a wildfire. Build your roof or re-roof with materials such as composition, metal or tile. Block any spaces between roof decking and covering to prevent embers from catching.

Vents
Vents on homes create openings for flying embers.

  • Cover all vent openings with 1/8-inch to 1/4-inch metal mesh. Do not use fiberglass or plastic mesh because they can melt and burn.
  • Protect vents in eaves or cornices with baffles to block embers (mesh is not enough).

Eaves and Soffits
Eaves and soffits should be protected with ignition-resistant* or non-combustible materials.

Walls
Wood products, such as boards, panels or shingles, are common siding materials. However, they are combustible and not good choices for fire-prone areas.

  • Build or remodel your walls with ignition resistant* building materials, such as stucco, fiber cement, wall siding, fire retardant, treated wood, or other approved materials.
  • Be sure to extend materials from the foundation to the roof.

Decks
Surfaces within 10 feet of the building should be built with ignition-resistant*, non-combustible, or other approved materials.

  • Ensure that all combustible items are removed from underneath your deck.

Rain Gutters
Screen or enclose rain gutters to prevent accumulation of plant debris.

Patio Cover
Use the same ignition-resistant* materials for patio coverings as a roof.

Chimney
Cover your chimney and stovepipe outlets with a non-combustible screen. Use metal screen material with openings no smaller than 3/8-inch and no larger than 1/2-inch to prevent embers from escaping and igniting a fire.

Garage
Have a fire extinguisher and tools such as a shovel, rake, bucket, and hoe available for fire emergencies.

  • Install weather stripping around and under the garage door to prevent embers from blowing in.
  • Store all combustible and flammable liquids away from ignition sources.

Fences
Consider using ignition-resistant* or non-combustible fence materials to protect your home during a wildfire.

Driveways and Access Roads
Driveways should be built and maintained in accordance with state and local codes to allow fire and emergency vehicles to reach your home. Consider maintaining access roads with a minimum of 10 feet of clearance on either side, allowing for two-way traffic.

  • Ensure that all gates open inward and are wide enough to accommodate emergency equipment.
  • Trim trees and shrubs overhanging the road to allow emergency vehicles to pass.

Address
Make sure your address is clearly visible from the road.

Water Supply
Consider having multiple garden hoses that are long enough to reach all areas of your home and other structures on your property. If you have a pool or well, consider getting a pump.

Always feel free to call us if you have any questions. 530-264-6800